Видео

what is that rubber clip called?

Nice work

OK , you have officially proved everything is on RUclips! We bought that exact power washer almost 2 decades ago on Maui. We brought it back to Michigan and it has sat the whole time. We fired it up and the pump stuck. I said there must be a way to get this thing going. Everyone said it’s junk. Your video just showed me how simple it is to restore the exact thing wrong with this one. Thank you for the upload. You’re much appreciated. From all of us on the island and here in Michigan, thank you! Yes!, we can now finished power washing our deck to paint it!

cool another vid with soldering lithium cells, why you are not informing viewers that is is dangerous and shouldn't be done?

Thank you for the video. Your a really big help!

What about bms- haven,t you conected.

perfect .thank uuuuuuuuuuuuuuuuuuuuuu same problem same bs you saved the day!!

My penis is stuck in the light. Can you tell me what I did wrong?

Thanks so much

Could you remove the shunt and replace it with a resistor?

Great video! Thanks for the help!

Thx so so much

Just did this today to my Dad's washer and it fixed it! Thanks.

Hi, sorry this is so late, but do you still to this day feel this board holds up on stability and fun?

Hello. I got a LED switch back turn signal light bulbs. At begin they were working, now they stopped to work. But they work perfectly when I turn on the emergency lights or when I lock/unlock the car. Do ya think if I replace the relay, that issue can be solved? Thanks

😊 genius man

While charging does the light works ?

I had a crushed lantern and took all the guts out and 3d printed a enclosure and 18650 battery holder, used the all parts to make a custom light to fit in my under-stairway closet where I have no AC outlet. Your video was my inspiration! I can slide it off the ceiling and charge it. A Big Thank you for guiding the way.

This is the video I have been looking for. I buy Blue Point oysters from the grocery store sometimes and they are so brittle. I typicallly jam the oyster knife in the side of it but will try breaking or clipping off the front part closest to myself next time. Will probably be much less frustrating and messy.

How is this over bumps?

I just did this to my 06 4Runner, and it works! Dont know how, but happy I dont have to deal with wiring in resistors. I went to Advanced Auto and Orilley and they both wanted to sell me resistors. THANK YOU!

Omgosh my brother!!! Wow we were so young

I did the same thing and it still has half of the pressure. What should I do next? Thank you.

If i had to replace ot whats that valve called

After you connected your hoses and you turned on the water did you bleed all the air out of the lines? Because to me it kind of look like you didn't and that's not good and I will definitely lead you with the problem that you have. Also when you start it you should have your trigger depressed.

Your engine carb needs cleaned. Should not be pulsing.

how long did this fix last for you. I have to regrease over and over even after buying new valve. POS

Please don't remove the old nickel strip if you don't have spot welding.

i have this same model, will try this ASAP

put this on a 14ft jon boat to have a power motor on back to get me up and down the reservoir.this thing will move you along like a pro. for the the price it is unbeatable. i gonna replace the front motor with a 55 and should be flying down the reservoir.

Thank you !! Exactly the info that I was looking for.

Blair at 05:20 ….. ooof

Thank you. Great video, it saved me lots of headaches!

Thank you, it worked perfectly!

I guess you want to lose the parts of on 😂😂the grass so you cant find them.

With mine, same Karcher 2400psi model, the need to clean and lube the unloader valve comes again and again, eventually you have to replace it. Amz or flea bay has 'em for $20, it's the green one. It is designed to open if the pump is not being used and the water gets too hot, but they start sticking. Also called a "Spill Valve".

Thank you so much for this video! Saved me a lot of time and money. Perfect!

Mine is having the same problem. I will be doing this in the morning. Let’s see how it goes.

Bro - great technique of using the water pressure to do the work to get the valve out

Stock esc, no issues?

Such a great idea. Thank you. I did it to mine and it's working great. I wish someone can design battery housing for 18650 battery, that would be amazing. I have seen one of Amazon seller modified their product for hybrid batteries (3 AA and one 18650)

looks easy thanks for posting

Thanks for the video. The exact problem I am having with mine after being put away for the winter. Now I know it's a easy fix and not a pump.

A little tricky because your camera was off-center a few times. However, otherwise the information was clear and to the point. Well done. And thank you very much.

Making use of the ruclips.net/user/postUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type

Awwwwwwwwww We was suh yong We didn't ree-oh-lize Just what we'd duh-un Awwwww We was too-ooh yong

Who is Allan and why does he have all these wrenches?😂😂 I will try the unloader valve. Definitely makes sense.

Why just not adapt it for 3 rechargeable AA 2700 mah batteries?

NEVER EVER SOLDER DIRECTLY TO A LITHIUM ION CELL!! DOING SO COULD LEAD TO FIRE AND/OR EXPLOSION! (just sayin'..) Instead, purchase cells with tabs (for soldering) pre-attached. These are available from Tenergy and other reputable battery suppliers.

Ms. Culpepper was funny. Wicked sense of humor. Class of '90